Join our mailing list!






Product Index
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

AW-9120B558-D  
AW-AME0270-0  
AW-AME0271-0  
AW-AME186-0  
AW-AME875-0  
AW-AME876-1  
AW-AMP022L0/A  
AW-BFE0088-SET  
AW-T7870B546  
GW-BB7207AC-SET  
GW-DZ100003  
GW-EZ43222440EP  
GW-LE-LINE-JF1T  
GW-LE31506N  
GW-MP-V2-H04-HOSEA  
AW-S4BB10CC-R00   #40/ BELT/ 10K/ CTS SPINDLE FOR AV-610 MODEL
AW-S4BD12CC-R00   #40/ BELT/ 12K/ CTS ROYAL SPINDLE FOR AF-610 MODEL
AW-S4AG08SC-A01   #40/ GEAR/ 8K/ CAT SPINDLE (W/O CTS)
AW-S4AG08CC-A01   #40/ GEAR/ 8K/ CTS/ CAT SPINDLE
AW-S4AG08CC-A01-R   #40/ GEAR/ 8K/ CTS/ CAT SPINDLE (REFURBISHED)
AW-HVN0492-2   #50 GRIPPER (DIN/CAT) FOR SP/LP/MVP MODEL
AW-PAP475-6   #50 KEY
AW-PAN252-2   #50 LEFT GRIPPER (DIN/CAT) FOR SP/LP SERIES
AW-PAN253-1   #50 RIGHT GRIPPER (DIN/CAT) FOR SP/LP SERIES
AW-AME911-1-SET   #50T SPINDLE DRIVE KEY FOR BM850, 1020, 1200, 1460
GW-FL-12108   (10.8MM) FINGER CHUCK FOR FEDEK XT-320/326 BARFEEDER FOR SW-20
GW-FL-12162   (16.2MM) FINGER CHUCK FOR XT-320/326 BAR FEEDER
FA-A06B-6114-H104   (6114) FANUC AMP FOR ALPHA 4i OR 8i SERVO MOTOR
FA-A06B-6114-H105   (6114) FANUC AMP FOR ALPHA 8i OR 12i SERVO MOTOR
FA-A06B-6117-H104   (6117) FANUC AMP FOR ALPHA 4i OR 8i SERVO MOTOR
FA-A06B-6117-H105   (6117) FANUC AMP FOR ALPHA 8i OR 12i SERVO MOTOR
GW-CY-37B0A   (GLS SERIES) DOUBLE O.D. CUTTING 1" TOOL HOLDER
GW-PC12-02   0 DEGREE AIR FITTING W/ 2/8" THREAD
GW-PC12-03   0 DEGREE AIR FITTING W/ 3/8" THREAD
GW-CY-3782   0 DEGREE ER-25 LIVE TOOL HOLDER FOR GLS-150M/200M/1500M/2000M/GTS-100M SERIES (OLD TURRET)
GW-CA-3382E   0 DEGREE TOOL HOLDER
AW-BDS496-0   0 POINT SIGN
GW-CB-4789   0-90 DEGREE LIVE TOOL HOLDER
GW-CY-4782   0° DEGREE LIVE TOOL HOLDER FOR GLS SERIES W/ NEW TURRET
GW-CR-3680   0° LIVE TOOL HOLDER (EXTERNAL COOLANT SUPPLY) (COLLET: ER-32) ( HG803036001)
GW-CB-4782B   0° LIVE TOOL HOLDER (EXTERNAL COOLANT SUPPLY)(COLLET: ER-32)
GW-CA-3382   0° LIVE TOOL HOLDER (EXTERNAL COOLANT THROUGH)
GW-CB-4782A   0° LIVE TOOL HOLDER (INTERNAL COOLANT SUPPLY)(COLLET: ER-32)(80BAR)
GW-CX-4582   0° LIVING TOOL HOLDER (Collet: ER-20, 1~13mm) TE42GA13 FOR 12 ST. GTS-150M&GLS-M SERIES
GW-CB-4582   0° LIVING TOOL HOLDER (COLLET: ER-25) FOR 6 LIVE ST. GTS-200-M SERIES
GW-CB-4782   0° LIVING TOOL HOLDER (COLLET: ER-32) FOR 12 LIVE ST. GTS-200M / GS-3000M SERIES
GW-LG-3691A   0° LIVING TOOL HOLDER (EXTERNAL COOLANT SUPPLY)(COLLET: ER-40) FOR GS-2000M/4000M
GW-LG-3691B   0° LIVING TOOL HOLDER (INTERNAL COOLANT SUPPLY) (COLLET: ER-40) FOR 12 ST. GS-2000M/4000M SERIES
GW-UCMQ177E47-7   1 -7/8” MAIN SPINDLE COLLET
GW-VK-3186   1" I.D. BORING BAR TOOL HOLDER (L200MM) FOR GV-1 SERIES
GW-VK-3187   1" I.D. BORING BAR TOOL HOLDER (L300MM) FOR GV-1 SERIES
GW-VK-3184   1" I.D. BORING BAR TOOL HOLDER
GW-CX-45C1Y   1" ID TOOL HOLDER (UNBORED, SLIGHTLY SMALLER HOLE)
GW-CB-4707   1" O.D. CUT-OFF TOOL HOLDER
GW-LG-3095A   1" OD CUTTING TOOL HOLDER
GW-LG-3195   1" OD EXTENDED TOOL HOLDER
GW-UK1016PS   1"PT Screw
GW-VK-3182   1- 1/4" O.D. TOOL HOLDER FOR GV-1 SERIES
GW-LG-3191   1-1/2" BORING BAR HOLDER
GW-LL-3009   1-1/2" HOLDER FOR SW-32
GW-LG-3194   1-1/2" ID TOOL HOLDER [BORED]
GW-VK-3192   1-1/2" O.D. TOOL HOLDER FOR GV-1 SERIES
GW-LA-31A1   1-1/4" I.D. TOOL HOLDER (T-Type)
GW-FL-12128   1/2" (12.8MM) FINGER CHUCK FOR XT-320/326 BAR FEEDER
GW-FL-12063   1/4" (6.3MM) FINGER CHUCK
GW-LC-3025A   1/4" I.D. TOOL HOLDER FOR SUB-SPINDLE
GW-CV-30A6   10 ST. O.D. 1" LEFT & RIGHT HAND FACING TOOL HOLDER
GW-CV-30A7   10 ST. I.D. 1-1/2" BORING BAR HOLDER
GW-UBNB210A8   10" 3-JAW BIG BORE CHUCK
GW-GUBP210A8-1   10" CHANDOZ 3-JAW CHUCK SET W/ WRENCHES
GW-CB-2206   10" COOLANT COLLECTOR (FOR SUB-SPINDLE H2, RIGHT OUT CHIP CONVEYOR) FOR GTS-260MMX MODEL
GW-ZK000010D   10" HARD JAW
GW-ZK00010F   10" HARD JAW: KITAGAWA
GW-FL-12103   10.3MM FINGER CHUCK
GW-UQMTH2707A   100 PSI PRESSURE COOLANT PUMP (MTH2-70-7)
AW-4210B1618   1000PSI ROTARY UNION
AW-T7870B751   100W POWER SUPPLY
AW-T7870B786   100W POWER SUPPLY
AW-LUB-PIPE-1   1065mm Lubricator Line
AW-T7420053   10A FUSE
AW-ACLPA11CS08-SET   10K DIRECT SPINDLE SET
AW-9610B143   10MM JOINT FITTING
GW-FL-12111   11.1MM FINGER CHUCK
GW-FL-12113   11.3MM FINGER CHUCK
GW-FL-12115   11.5MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SWISS SERIES
GW-FL-12116   11.6MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SWISS SERIES
GW-FL-12118   11.8MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SW-20 MODEL
AW-T7870B520-SET-A   12 KEY PANEL BOARD (WITH 12 PUSH BUTTONS) FOR AUX FUNCTION (TYPE A)
AW-T7870B520-SET-B   12 KEY PANEL BOARD (WITH 12 PUSH BUTTONS) FOR MANUAL CONTORL & POWER (TYPE B)
AW-T7870B520   12 KEY PANEL BOARD FOR AXIS FUNCTION
GW-CA-3045   12 S.T. CLAMPING PIECE
GW-CX-45A6   12 S.T. I.D. 1" BORING BAR TOOL HOLDER
GW-CX-45A5Y   12 S.T. I.D. 1" DOUBLE BORING BAR TOOL HOLDER (UNBORED)
GW-CA-3151Y   12 S.T. I.D. 2-1/2" TOOL HOLDER (UNBORED)
GW-CX-45A6Y   12 S.T. I.D. 3/4" DOUBLE BORING BAR TOOL HOLDER (UNBORED)
GW-CA-3577B   12 S.T. O.D. 1-1/4" CUTTING TOOL HOLDER (NO LIVE TOOLING)
GW-CX-45B8   12 S.T. O.D. 3/4" CUT OFF TOOL HOLDER
GW-CX-45A9   12 S.T. O.D. 3/4" FACING TOOL HOLDER (SHORT)
GW-CX-45A5   12 ST. I.D. 1" DOUBLE BORING BAR TOOL HOLDER
GW-CX-45C1   12 ST. I.D. 1" TOOL HOLDER (BORED)
GW-CY-38A7   12 ST. O.D. 1" FACE TOOL HOLDER
GW-CA-3150   12 ST. O.D. 1-1/4" CUTTING TOOL HOLDER
GW-CY-3131   12 ST. O.D. 3/4" CUT OFF TOOL HOLDER
GW-CY-3107   12 ST. O.D. 3/4" FACE CUTTING TOOL HOLDER
GW-CY-38A6   12 ST.: I.D. 1.5" TOOL HOLDER (COMBINATION TYPE)
GW-ZHXT326FL12127   12.7MM FEDEK FINGER CHUCK FOR SW-20
GW-GW-LL-30F5A   12MM SHANK
GW-LE-DDCB   12ST TURRET
GW-FL-12133   13.3MM FINGER CHUCK
GW-FL-12135   13.5MM FINGER CHUCK
GW-ZMJ0013160BA   13/16’ GUIDE BUSH
GW-ZHVITO01236-1   13MM GUIDE CHANNEL SET
GW-FL-12140   14.0MM FINGER CHUCK
GW-FL-12158   15.8MM FINGER CHUCK FOR FEDEK XT-320/326 BAR FEEDER
GW-FL-12159   15.9MM FINGER CHUCK FOR XT-320/326 BAR FEEDER
AW-ACLP910CA01   15K Built In Spindle
AW-STPD15CC-M00   15K DIRECT DRIVE SPINDLE
GW-FL-12165   16.5MM FINGER CHUCK FOR FEDEK XT-320/326 BAR FEEDER
GW-FL-12160   16MM FINGER CHUCK FOR FEDEK XT-320/326 BAR FEEDER
GW-FL-12175   17.5MM FINGER CHUCK FOR XT-320/326 BAR FEEDER
GW-FL-23200   17.5MM FINGER CHUCK FOR XT-320/326 BAR FEEDER
GW-ZHXT326FL12175   17.5MM FINGER CHUCK FOR XT-320/326 BAR FEEDER
GW-FL-12178   17.8MM FINGER CHUCK
GW-UBN218A11   18" 3-JAW CHUCK (A2-11) M130X2 (N-218A11)
GW-CHUCK-V218   18" AUTOSTRONG V-218 CHUCK
GW-ZHXT32632190   19MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SW-20 MODEL
GW-VK-TEBF   1” I.D. TOOL HOLDER
GW-UCMQ173E254   1” SUB SPINDLE COLLET
GW-LG-3192-NEW   2" O.D. TOOL HOLDER (NEW DESIGN)
GW-LG-3192-OLD   2" O.D. TOOL HOLDER (OLDER DESIGN)
GW-LG-3192Y   2" O.D. TOOL HOLDER (UNBORED)
GW-LC-ZDB0   2-SPINDLE FRONT DRILLING UNIT ER16 LIVE TOOL HOLDER (T3400, T3500) FOR SW-20 MODEL
GW-XTP21-37-2-K1   21MM GUIDE CHANNEL SET (2 PCS/SET- 21MM GUIDE CHANNEL+ SLEEVE) FOR FEDEK XT-320/326 BARFEEDER
GW-CJ-8422   22MM SLEEVE FOR GV-1 SERIES
GW-UBV224RA15   24" HYDRAULIC CHUCK
AW-T7870B760   24VDC POWER SUPPLY
AW-4561B6-250   2500MM OIL LUBRICATOR LINE FOR YAMA SEIKI C-FRAME
GW-CN-9201M   3 PHASE INDUCTION GEARED MOTOR (NL05-280201653, GEARD. 1:165)
GW-DZ50012D1   3 PHASE INDUCTION MOTOR PUMP FOR GA-3000 SERIES
GW-FL-07030   3.0MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SW-20 MODEL
GW-FL-12030   3.0MM FINGER CHUCK FOR XT-320/326 BAR FEEDER USING ROTATING JOINT FL-15800 FOR SW-20 MODEL
GW-FL-07032   3.2MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SW-20 MODEL
GW-FL-12032   3.2MM FINGER CHUCK FOR XT-320/326 BAR FEEDER USING ROTATING JOINT FL-15800 FOR SW-20 MODEL
AW-SPA13A03   3.5K Draw bar (BT)
AW-ACGPA11A07   3.5K GEAR SPINDLE
AW-30306018   3.5K SPINDLE BEARING
AW-30306212   3.5K SPINDLE BEARING
AW-1131140   3.5K SPINDLE RING
GW-FL-07038   3.8MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SW-20 MODEL
GW-FL-12038   3.8MM FINGER CHUCK FOR XT-320/326 BAR FEEDER USING ROTATING JOINT FL-15800 FOR SW-20 MODEL
GW-LC-3024   3/16" I.D. TOOL HOLDER FOR SUB-SPINDLE
GW-LC-3125A   3/16" I.D. TOOL HOLDER FOR SUB-SPINDLE
GW-ZMJ0012160BA   3/4" GUIDE BUSH
GW-CY-37B0   3/4" O.D DOUBLE CUTTING TOOL HOLDER
GW-VGT12S06   3/4" PT MALE TO 3/8" JIC FLARE FITTING
GW-LA-31A7-OLD   3/4" X 3/4" TOOL HOLDER (GANG TYPE)
GW-LA-31A8-OLD   3/4" X 3/4" TOOL HOLDER (GANG-TYPE) (50MM)
GW-LA-31A9-OLD   3/4" X 3/4" TOOL HOLDER (GANG-TYPE) (72MM)
GW-LA-31A3-OLD   3/4" X 3/4" TOOL HOLDER (GANG-TYPE) (92MM)
GW-LA-31A7-NEW   3/4" X 3/4" TOOL HOLDER (T-TYPE)
GW-LA-31A8-NEW   3/4" X 3/4" TOOL HOLDER (T-TYPE) (50MM)
GW-LA-31A9-NEW   3/4" X 3/4" TOOL HOLDER (T-TYPE) (72MM)
GW-LA-31A3-NEW   3/4" X 3/4" TOOL HOLDER (T-TYPE) (92MM)
GW-CY-37A7   3/4” FACE CUTTING TOOL HOLDER
GW-CY-37A7A   3/4” FACE CUTTING TOOL HOLDER
GW-LL-3129F   3/4” SLEEVE
FA-A20B-8101-0770   30/31/32IB FAST ETHERNET BOARD 100BASE-TX
AW-4561B6-300   3000MM OIL LUBRICATOR LINE FOR YAMA SEIKI C-FRAME
AW-3035028   3035028 SPINDLE BEARING
GW-UBV232A15-1   32" HYDRAULIC CHUCK
AW-T7760B503   33 KEY PCB BOARD
AW-4561B6-330   3300MM OIL LUBRICATOR LINE FOR YAMA SEIKI C-FRAME
AW-T7720B639-0   36W WORK LIGHT
AW-T7870B615   39 Key PCB board
FA-A98L-0031-0026   3V LITHIUM BATTERY BLACK MODULAR TYPE
AW-T7870B622   4 KEY IO BOARD FOR OPERATION PANEL (SK12C)
AW-CMTPT026-4PIN   4 PIN POWER OUTLET
GW-FL-07040   4.0MM FINGER CHUCK FOR BARFEEDER FEDEK XT-320/326 FOR SW-20 MODEL
GW-FL-12040   4.0MM FINGER CHUCK FOR XT-320/326 BAR FEEDER USING ROTATING JOINT FL-15800 FOR SW-20 MODEL
AW-S4AD15CC-R00   40T 15K DIRECT SPINDLE W/CTS (R)
AW-DETA-40T-MOTOR-BREAK   40T DETA MAGAZINE MOTOR/BREAK
AW-AME0154-2   40T DRAW BAR W/ CTS
AW-AME843-1   40T DRAW BAR W/O CTS
AW-9436B514-1   40T PULL STUD COLLET FOR VMB/BM SERIES
AW-9050031-COLLET   40T SPINDLE COLLET
AW-9436B513-1   40T SPINDLE COLLET FOR 45 DEGREE PULL STUD
AW-S4AB10CC-R00   40T/ BELT/ 10K/ CTS SPINDLE FOR AV-1000 1250 MODEL
AW-S4AD12CC-M00   40T/ DIRECT/ 12K/ CTS SPINDLE FOR AF1000 MODEL
AW-T7720175   40W WORK LIGHT
AW-4561B6-420   4200MM OIL LUBRICATOR LINE FOR YAMA SEIKI C-FRAME
AW-4561B6-450   4500MM OIL LUBRICATOR LINE FOR YAMA SEIKI C-FRAME
AW-4561B6-470   4700MM OIL LUBRICATOR LINE FOR YAMA SEIKI C-FRAME
AW-4561B6-480   4800MM OIL LUBRICATOR LINE FOR YAMA SEIKI C-FRAME
FV-EVL12-VL01M108-ROG   49" CHUCK RING FOR FV-1200 MODEL
AW-9690B000495   4TH AXIS CABLE
AW-T7850B825   4TH AXIS ENCODER CABLE
FA-CFDA-0MPB-0030-AAB   4TH AXIS ENCODER CABLE (3 METER)
AW-T7850B827   4TH AXIS ENCODER CABLE (OUTER)
AW-4XINTERFACE-2   4th AXIS INTERFACE FOR AV SERIES & AF SERIES & BM850 1020 1200 1460
AW-4XCABLE   4TH AXIS MOTOR AND ENCODER CABLE SET

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35